AO Smith S3+ Water Purifier



Product Dimensions (H x D x W) 460mm x 256mm x 380mm
Net Weight 8.5 kgs (approx.)
Gross Weight 10 kgs (approx.)
Flow rate *Up to 15 litres per hour
Storage tank capacity 5 litres (approx.)
Purification technology RO (Reverse Osmosis) 6 Stage
Purifying Technology Sediment filter + SCB Filter( Fine Sediment + Carbon block) + Side Stream RO Membrane + SCM-TECH(Silver Activated Post Carbon+ MIN-TECH)
Membrane type Thin film composite RO membrane
Material of construction for plastic parts Food safe, non-toxic, engineering grade plastics
Pump type Diaphragm pump, 24VDC, 0.26 Amps, Operating Pressure 125 psi (Max.)
Input Voltage range 150 – 300 VAC, 50 Hz
Power rating (Max) 48 Watts
System input pressure*** 5 psi to 30 psi
% Recovery** Up to 30%
Note: * Flow rate depends on variable factors such as feed water pressure, feed water characteristics and condition of the RO membrane and filters.
** Recovery and TDS reduction percentages also depend on variable factors such as life and condition of the RO membrane and filters, feed water pressure and feed water characteristics.
*** If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the pressure is lower than 7 psi, a booster pump needs to be installed. Ensure you buy them from A. O. Smith Company Authorised Service Technician.


There are no reviews yet.

Be the first to review “AO Smith S3+ Water Purifier”

Your email address will not be published. Required fields are marked *